[yokese]

First, to install the drivers you have to do it in the device manager. Under ‘SD host adapaters’ you’ll see three (or four I don’t remember) ‘Intel SD Host Controller’. You’ have to update the drivers of all of them to be sure you update the right one (it doesn’t make nay damage). To install these drivers you have to be in Windows mode to allow install unsigned drivers too.

These didn’t solve all my problems, but at least I can read some sdcards. Others remain unrecognized by windows.

Later I left Windows 10 to install updates form windows update, and magically, now I can read all my sdcards. You can try this too.

 

 

[yokese]

I have the same problem here with a X80 plus. I have ‘tPAD 3.02’ in BIOS and windows doesn’t find nothing. I’ve read that 3.04 it’s only a ‘minor patch version’ that the device manager could apply only if you have the 3.03 version, but I can’t find 3.03 anywhere (and I’ve searched for a long time in russian, chinese,….forums).

Anyone could help please?

[yokese]

It happens to me the same trying to reinstall Windows after reboot in a Teclast X80 Plus. The solution in my case was to enter the BIOS and disable ‘fastboot’ or at least, put it only to ‘partial’ from USB (not ‘full’, that’s the problem).

[yokese]

Awal Din wrote:

Yes, @yokese… just change configuration from blank to recover To flash windows 10 you need usb flash drive with format fat32 + otg hub with keyboard Just copy all windows 10 firmware to the flash drive… Tutorial you can search on another thread..

Ok, thank you

[yokese]

After following this method, could it be reverted to dual boot again flashing with the original ‘gpt.bin’ or another method?

 

[yokese]

Hello I’ve managed to root my tablet (x80 plus (H5C5)) with the supersu issue.

All it’s fine except that now the sdcard fails to be mounted in android. Also a new message in the notifications bar says that the SIM card is not present (?).

I don’t now what to do and even I’m thinking in installing EVERYTHING from scratch in the tablet. I’ve made some screenshots, so maybe someone can help me:

Actual mount information:

https://postimg.org/image/d00j1fs3h

Message on boot and get with dmesg, informing that sdcard can’t be mounted (error -110):

https://postimg.org/image/sa0e8mnlp

https://postimg.org/image/lktusm29p
Fstab file:

https://postimg.org/image/n15dar56l

https://postimg.org/image/s17ewg071

 

[Author]

Posts