X98_PRO_android_5.1_mirek190_v6.0 rom

[Rosa]

Good rom mirek is great.

[Jean Marc]

Hi,

Thanks for your Work Mirek, I downloaded the file 2 times but I cannot open the zip file, it gives me error, is there any password?

Cheers.

J-M.

[Ren Ray]

Jean Marc wrote:

Hi, Thanks for your Work Mirek, I downloaded the file 2 times but I cannot open the zip file, it gives me error, is there any password? Cheers. J-M.

the rom file compressed by 7z.you may need use some soft to uncompress the rom file ,like 7z or winrar.no password.

[Milosz]

Great 😉 big thx Mirek! I will make upgrade later…till now v4 …. Guys please make comments about differents (4Gb Now!) Thx

[lucas]

Hi Mirek,

From last Monday, every time I boot up Android it get stuck in the Android logo. I wanted to flash again your ROM but the computer now doesn’t detect the tablet. I know that you have to boot up android, but as it gets stuck in Android logo it is impossible. Do you know or anyone else how I can make it work?

Thank yoy for your excelent job!!!

Regards,

[Karl0ss]

lucas wrote:

Hi Mirek, From last Monday, every time I boot up Android it get stuck in the Android logo. I wanted to flash again your ROM but the computer now doesn’t detect the tablet. I know that you have to boot up android, but as it gets stuck in Android logo it is impossible. Do you know or anyone else how I can make it work? Thank yoy for your excelent job!!! Regards,

You don’t need to boot into android, you need to boot to DNX mode, turn off the tablet and turn it on holding Power + Vol Up + Vol Down..

You will see yellow “DNX MODE” then you can flash his rom..

 

Great work on V5 Mriek, working really well 🙂

[lucas]

Hi Karl0ss,

I boot in DNX Mode and the tablet is not recognized by the computer. I did what you wrote when I installed Mirek’s Rom. Any other solution?

 

Thanks!!!

[Chris Power]

You have to be in Android.
Then shut the tablet down.

 

Then switch on and go into DNX mode.   If you don’t do it this way, the PC won’t recognise the device.

[Karl0ss]

lucas wrote:

Hi Karl0ss, I boot in DNX Mode and the tablet is not recognized by the computer. I did what you wrote when I installed Mirek’s Rom. Any other solution? Thanks!!!

You need to install the drivers that are supplied as 1 and 2..

[Honza Martinásek]

I was fighting with drivers (again) too… And i won 😀 The problem for me was that the Windows couldnt recognized the tablet properly… I instaled the drivers (and the iSocUSB-Driver-Setup-1.2.0 from earlier relase too) but i was stuck with “something AD” device in devece manager… So i manualy selected (Update driver) in device manager and i found “Android ADB” driver under USB devices (at the end of the list of various devices to select)… Finaly the flashing started, but after a while (android with opened belly on screen) there was the “something AD” device in device manager again… So again I did found driver manualy… And IT WORKED! lol i was desperated and this was my last idea 😀
Sorry for bad english and also i cant remember the exact names for various things in the description because i have Windows (10 64bit) in my native language, but i hope this can help someone…

[fire]

Hi All;

I have been have a problem with the partition setting. I always get 20 g for android. Everything works I am on v5 I did a clean install and put the 50gb gpi into the rom file when I did the clean install. I cannot get it to get off the 20 gb. Anyone else have this problem? thanks for any help.

[NCC1701-E]

Mirek,

Thank you for your work and will gladly donate to you soon.  I have had issues with my tablet crashing to a black screen.  It takes either time or button push kung fu to get it to turn back on.  Also charging the tablet when turned on takes some precise steps to achieve.  You have to plug the cord in the tablet before it is in the electrical outlet.  For Android, the charging indicator stays on even when removing the cord.  In Windows it is the same as all I just mentioned for Android. The exception with Windows still showing charging while no cord inserted is that the tablet starts to overheat like crazy.  Not sure why indicator doesn’t go away when removing the cord for both Android and Windows.  Have to reboot without the cord of course to clear indicator.  I am running mirek 4.0. Will your newest 5 ROM resolve any of said issues?

 

No matter where you go, there you are!

[mirek]

NCC1701-E wrote:

Mirek, Thank you for your work and will gladly donate to you soon. I have had issues with my tablet crashing to a black screen. It takes either time or button push kung fu to get it to turn back on. Also charging the tablet when turned on takes some precise steps to achieve. You have to plug the cord in the tablet before it is in the electrical outlet. For Android, the charging indicator stays on even when removing the cord. In Windows it is the same as all I just mentioned for Android. The exception with Windows still showing charging while no cord inserted is that the tablet starts to overheat like crazy. Not sure why indicator doesn’t go away when removing the cord for both Android and Windows. Have to reboot without the cord of course to clear indicator. I am running mirek 4.0. Will your newest 5 ROM resolve any of said issues?

Have you made clean install ?

I had black screen problems on v3 yet but not v4 at all until I really messesed  up with modifications .

But after clean install they gone.

I had the same problem when updated from v4 to v5 ( dirty install ) but after clean install ( data formated )  from 3 day’s now is OK – no blackscreens at all .

With the charger I don’t have problems like you.

[lucas]

I am in trouble, because I am not able to boot up in android. It gets stuck in the android logo, so when I go to DNX Fastboot mode it doesn’t detect the tablet. What can I do?

[Karl0ss]

lucas wrote:

I am in trouble, because I am not able to boot up in android. It gets stuck in the android logo, so when I go to DNX Fastboot mode it doesn’t detect the tablet. What can I do?

Read the thread mate…you need to install the drivers!

[Author]

Posts