[bubu]

K-MUN wrote:

finally i can get this item at aliexpress

Ithink the same chip has burned. could you solve the problem with the aliexpres chip?

 

Attachments:

You must be logged in to view attached files.

[bubu]

.

[bubu]

This is the original author link of the ROM http://www.modaco.com/forums/topic/377890-devrom412-cyanogenmod-121-android-511-for-chuwi-vi10-plus-hi10-plus-hi10-pro-hibook-pro-hi12/  you have to look at the serial number of your tablet to download the correct pach.
I’ve only tried cm12.1 I have to say the rom goes great. In fact it is the best option that exists right now for this tablet.

[bubu]

verbage wrote:

I just got a Hi12 at the end of last week, and had the same issue–pretty poor sensitivity with the touch screen. But I think I figured out the problem just today–the plastic screen cover that ships with the Hi12 actually covers a plastic screen protector beneath it. I thought the plastic screen cover directly covered the screen, and so I did not actually remove it till today. That is when I saw the plastic screen protector beneath it. Anyway, I ended up removing everything, and putting on a nice, 9H glass screen protector, and the sensitivity is much improved.

 

Hi. Now you have good sensitivity with the touch screen?

Can you give me the link of the protective glass you bought?

Thank you.

[bubu]

you found any? which is to say that weighs heavily ? you can put links to see ?

[bubu]

Samppa wrote:

It´s quite intresting Bios what i have now. Bad thing is that i don´t really wanna mess up anything there cos i don´t sure know all options. I tried to look wi-fi options, but there isn´t any. Wifi speed is good near my router, but about 10m away, speed is 0.1-0.2 Mb/s. Same thing in Android and Windows. I think antenna isn´t properly installed??? Everything else is working quite well, no crashes this far. Is there anyway to copy my bios? I was thinking if somebody wanna play with options.

Hello @Samppa, can you make a copy of bios 1.09 and upload it to the forum.

Thx .

Bengun wrote:

Who have BIOS v.1.09 or other version with unlocked all menu. Please dump bios to file and shared BIOS.BIN file, or attach to this topic. Thnx. dump bios utility https://yadi.sk/d/R0tmInbhr2HSz UPD.

Iñigo Martinez Lasala wrote:

I have a K6 version and mine is 1.14, if I remember…

Can You dump BIOS 1.14

[bubu]

ImADev wrote:

bubu wrote:

I have it clear . The link is down . You can upload the files? Thank you very much for your help.

Try the link again. It was missing the “l” on the end. Scroll down to just above the comments and you’ll see the RAR files.

Thank you very much , now I do. I’ve already downloaded.

[bubu]

ImADev wrote:

bubu wrote:

You can tell me that configuration has worked for you in the program?

Type: SPI FLASH Manu: GIGADEVICE Name: GD25Q64 You can get v1.18 of the program and the drivers from this website.

bubu wrote:

You can say what position it will put the adapter and the clip?

The pink wire is pin 1. Pin 1 needs to go on the circular indent on the chip.

I have it clear . The link is down . You can upload the files? Thank you very much for your help.

[bubu]

ImADev wrote:

I’ve already wrote this out once, but for some reason my post isn’t displayed. Anyway, the adapter was delivered the other day and I’m pleased to say that it worked perfectly. I just had to attach the clip to the chip and write the BIOS. @bubu It’ll work, but you can get the newer version for cheaper. Also don’t forget that you’ll need a clip and cable. I’d also recommend getting the 1.8v adapter, just so you don’t permanently kill the tablet.

 

Thanks for your answer. I bought the programmer and the adapter that you said.

I have some doubts. you kindly answer?

This is the bios I have to put: X98 Pro Bios 1.13 K9C6 EMMC Fix?
You can tell me that configuration has worked for you in the program?
You can say what position it will put the adapter and the clip?

Thank you.

PS: someone tried bios 1.6? This in 4pda.ru

[bubu]

Hello, I have my teclast brick pro x98 (K9C6). What BIOS and where can I download to flash?

Can I use this programmer? If the voltage is 3.3v have a problem?

Sorry for my bad English (I am Spanish)

Thx.

[Author]

Posts