[George Anas]

In my case neither the sd (I can read it normally from other devices) nor the tablet’s card reader is damaged (it works fine with Android). It looks more like a driver issue in Windows…

When on Windows side, the 64GB sd does not appear anywhere, the 32GB does the sound for mounting/unmounting and it appeared once in the drives when I disabled/re-enebled the driver of “storage cotroller” in device manager. But all the other time the 32GB only does the sounds and appears with the yellow triangle under “storage cotroller” in device manager.

 

Attachments:

You must be logged in to view attached files.

[George Anas]

Hi, I haven’t yet tried the solution given here but I would like to ask if someone has an idea of what could be happening in my case.

I have a Netac P500 64GB, supposedly SD-XC 1 U3 30/80mbps.

From the beginning I formatted it as FAT32. It was working great in Windows but in Android it was connecting and disconnecting for some time. Then it stopped doing that and I was able to save things in the sd and read them in both OS. When I use the tablet it stays for long periods in the one OS until I switch it to the other one and then it stays there for some period, like a week or so.

Now the problem is that it works fine in Android and in Windows it does not work at all. It does not even play the sound when inserting/exporting the sd, it is like it is not detected at all. I inserted the sd from my mobile, a Kingston 32GB Class 10, and it plays the sound for inserting/exporting but it doesn’t read it or appear in the Device Manager under Disk Drives.

Does any of you have any idea?

[George Anas]

Atleast I, eventually bought the iWork 8 for my father and I didn’t bother much with Windows. It has a usable partition for the Android about 7GB of free space  (pretty unusable the windows parrtition, less than 4GB free after only the updates). Android partition is good enough for him, plus a micro sd for anything else he want to store inside.

Mainly because I read about the X80 PRO problems didn’t bought it, the iWork 8 is very much the same but with a little smaller battery and with no other issues. When I set it up for my father (a week ago) didn’t notice any issues with wifi or anything else.

Hope I helped a little bit

[George Anas]

I also used this way thanks!!

 

[George Anas]

I am also interested for the exact same reason as Ryhmez.

Does anyone have instructions for turnng the tablet only in Android with the full 32GB drive usable?

Edit:

After a small search I have found this discussion in an Onda forum. There are some steps one could follow, but the main issue is how to make the Android see the whole drive space since it is hard coded in the Rom.

http://www.ondaforum.com/topic/3713-how-to-install-only-android-on-a-dual-boot-v919-3g-air/?page=2

If there someone adventurous enough, you can try it.

I just want to buy the tablet and be able to do it but I am afraid I might brick it and I do not have enough knowledge to recover it from there.

[George Anas]

Mine also works USB 3.0 speeds and powers my external 2.5″ 1TB HDD

View post on imgur.com

I have the tablet for some time but yesterday arrived my USB 3.0 OTG cable

And I can say that even the USB 2.0 port is quite fast, getting up to 40~42mb/s read and 34-36mb/s write speed

Very happy 🙂

[George Anas]

For whoever interested in the original Cube iWork 10 keyboard, have a look around, because prices are getting higher …

I remember it was around $40 and now in best case it is $48 and mostly it is $60+

[George Anas]

What did you get eventually?

If you have the money to go fo an Cube i7 stylus I would say go for it. It has the core m and ssd… for almost double the price of the i work 10 but it is an actuall upgrade. For some time it was for $270 but it is back again at ~$350

Or just wait a while more for either the price of Hi12 to drop or new models to come out. I don’t fill like Hi12 is worth it $100 more than the iWork 10.

I have some money in my gearbest wallet and was thinking for a second tablet (I already have an iWork 10), but I will probably wait a few more months to see what will come out…

[George Anas]

Good information!

I would really love to try and make a mod in the future for importing an extra battery inside the keyboard if possible

[George Anas]

I believe there is only one version, the “Flagship”. The “Ultimate”must has been the wrong translation when initially the tablet was released (or prerelease name), until they found out and listed it as “Flagship” on all on-line stores.

View post on imgur.com

You can see in the picture of the back of my tablet that next to the “i work 10” logo, on top of the chinese letters there is the name “Flagship”.

In a little search I did, even stores with a listing of  “Cube i work 10 ultimate” if you see closer the picture of the back of the tablet, the name look the same as mine stating “Flagship”.

If anyone on this forum has an iwork10 with a diffferent logo stating Ultimate, please share!!

[Author]

Posts