[Kaasie]

Crucial MX 300 (CT275MX300SSD4) or Samsung 860 EVO (MZ-N6E250BW)

The Samsung runs with me without problems. But that’s not a guarantee, as there are too many configurations from the jumper.

[Kaasie]

@ Giuseppe

No, not your problem with starting. For me, Windows got stuck during operation. Maybe something is not loaded properly by fast booting. The UEFI is full of mistakes, I mean. But with the default values in the boot menu, it’s still going great for a China notebook. Unfortunately there is no support from Jumper, which would solve many problems immediately. They just sell like crazy. This is not good in the long run and will certainly lead to many bad-tempered customers. But if the customer is gone, he will not come back so soon! If the support were there and good, then the devices would be a real alternative. So I see it more and more as a hobby or leisure activity. When I compare it to my Gigabyte or Asus parts here, jumper and family are still not a real alternative or congruence. The price for the hardware is great, only what uses good hardware with bad software?

[Kaasie]

@ Giuseppe,

Please test in uefi only windows loader as the first boot option and set the second boot option to disabled. Should fix the boot problem. Is synonymous with me set. I just remembered ….   🙂

[Kaasie]

https://www.amazon.de/Samsung-MZ-N6E250BW-860-EVO-Interne/dp/B078WQC2GQ/ref=sr_1_2?ie=UTF8&qid=1525781017&sr=8-2&keywords=ssd+860+evo+250gb

[Kaasie]

Hi, the values were determined with activated Rapid Mode by Samsung Magician. Here with deactivated mode. And all values come from my ezbook. It’s all real. Pictures or a video (is this possible?) I can adjust this evening.

Attachments:

You must be logged in to view attached files.

[Kaasie]

@Giuseppe

No, everything runs really smoothly. Even the clean installation of Windows no problems. The only thing I noticed was to disable fast booting in UEFI. Apparently there are a few problems. For me Windows hung in operation. I then loaded the basic settings and left it that way. Since then it works. I also notice no difference without fast boats. The Ezbook starts very fast (boot time 21 sec. To work ready). Here’s a benchmark with CrystalDiskMark. I think the values are ok for this PC. What do you mean?

Attachments:

You must be logged in to view attached files.

[Kaasie]

Solved! The 32bit version of Visual C ++ was missing. But why did version 8.50 work? I do not understand that entirely….

[Kaasie]

Hello, I just wanted to start ThrottleStop 8.60 (Windows 10 1803), unfortunately it does not work. Error “mfc120u.dll was not found”. Version 8.50 works without problems. Of course, Visual C ++ 2013 is installed. Where is the problem? Who it’s also so? Is there a solution?

[Kaasie]

Where can I find this? Is there a link?

[Kaasie]

In Windows, I also see 6GB. Unfortunately, one does not see whether single or double channel. What does CPU-Z or HWinfo say to you (screenshot?)? Do you happen to have a picture of your motherboard without a copper cover? It seems to me you have the same board as me. (seen in the article about battery change)

Incidentally, great work from you here in the forum! 🙂

Attachments:

You must be logged in to view attached files.

[Kaasie]

Hello, I also tested a long time and installed different models. Two work very well in my ezbook (UEFI 12/05/2017). Crucial MX 300 (CT275MX300SSD4) and the Samsung 860 EVO (MZ-N6E250BW). I have kept the Samsung as it already has better house values. Also she has 5 years warranty! I hope I could help a little and shorten work? Last picture is with rapid mode by Samsung Magician. Should be quickly enough …

Attachments:

You must be logged in to view attached files.

[Author]

Posts