[kean3D]

vlad wrote:

Success, use CH341A (without adapter 1.8V !) + Colibri (GD25LQ64)

1. read
2. earse
3. write
4. read (for check crc32)

good job

please can you say where it can be find the Colibri software?

[kean3D]

@giovanni could i ask you an advice since you are clearely the most advanced user and bios modder?
as read around already many jumper users got problems with bios just changing settings (black screen with blue led on)
i am almost convinced that it is my problem, and if i disconnect battery (resetting bios) i will fix it;
cause flash was ok and checks too (image was taked before rebooting, last time i saw the screen on)

i attached here both my original v6 bios backupped, and the v6 modded one i flashed

when you can and if you want can you please check thoose for see if are matching, so i will be sure that the battery trick will solve my problem before avoid the warranty..
i will be so gratefull

[kean3D]

yes very strange; no i can’t reflash, i have black screen, just the blue led is working

i just tried to blind flash, with the same procedure, but on the black screen and with my backupped bios

just tryin everything but i think my mainboard is different from your at this point..

and as now just a bios reprogram can back this pc to live, no more option

[kean3D]

Bernd wrote:

Wanted to remove the file on p5, but I’m not able to do that. Will update the post instead to not use the file then. @kean3d, can you just boot into the EFI shell? I always used the EFI shell to read and write the ROM.

i can’t, i also tried a blind re-flash with my original backupped bios, still no luck

damn,

[kean3D]

at this point i think is not hard bricked but something is mess with config on bios when rebooted after exit bios after flash..  flash was ok , bios modded passed all checks..  or mine it has another tipe of mainboard instead of your or.. i dunndo is hard bricked..  be carefully peeps also with same version, if you mod better to mod by yourself your bios..

[kean3D]

yes used that v6_modded, my ezbook has v6 from 5 dec 17, very strange, did you tested that bios on your machine?

Attachments:

You must be logged in to view attached files.

[kean3D]

thanks man hope to resolve it in a way or other

[kean3D]

yes, no luck; strange that now i can hear that pwm noise (that below 40% brightness) ,

[kean3D]

thanks for the reply, i used the v6_modde one posted in page 5 of this thread; all was ok as can seen in the image take it in my previous post; i tried the blind sequence but no luck, have to test the to connect to external monitor, but i think i will not open in..maybe i can send it back if i can’t fix it; as now im waiting to dry battery and try to see how it do like that

[kean3D]

<p style=”text-align: left;”>hi there, managed to unlock the bios of my v6, with the one alreafy unlocked posted here some posts early; all the checks was okey so i rebooted, then i was again in bios (was locked), rebooted and now screen is black with the blue led on; i think i just need to reset to fatcory the options or any help would be gratefull tho</p>

Attachments:

You must be logged in to view attached files.

[kean3D]

same thing with the v6, got wifi problems too, first fixed by update ac-3165 drivers with the microsoft one found on the list in drivers update

then reboot and back apply the latest one from intel, and wifi become now stable ..

so, searching some updated drivers, i found with drivermax a new updated drivers for ac-3165

which is dated: 4 dec 2017  version: 20.20.0.100

installed and this is so better, signal is pretty constant, no disconnection at all 😉

[kean3D]

yes the license is on the bios, it will activate by itself

[kean3D]

got same problem but with italian language, the pack can be downloaded but can’t be applied;

so better do a fresh  Win 10 install v.1709 from .iso, just open the iso and let install it

for drivers use softwares like drivers booster or similar..

 

[Author]

Posts