[Andras Kenez]

Have you got C type of iWork 10?

I have TD (mrousB 3.0) version and micro USB 3.0 port works at 3.0 speed.

But I do not know why when I tried the ports first  it worked at 2.0 mode only.

I had updated Windows and it worked at 3.0 speed.

So update Windows try other usb 3.0 device (HDD, USB drive) and it may be will help.

 

[Andras Kenez]

I have 4 Z8300 devices

Onda Obook 10 and Jumper Ezbook 2 works with SDR104 mode (sd card reading about 54MB/s-84MB/s depend from SD card )

Cube Iwork 10 and Chuwi Hi 8 pro works only with DDR 50 (SD card reading about 38-40 MB/s)

 

 

[Andras Kenez]

See information from here: (I think same, )

Use google translate (or Chrome) if you not fluent in Russian. 🙂

But will be careful with canging BIOs setting. very easy to brick every Atom based tablet with inproper BIOS setting (changing ram speed, dual channel etc)

 

[Andras Kenez]

It’s great shame but tablet Atoms ( Z8300/Z8500) do not suport SATA port

[Andras Kenez]

I tested four 64GB  SD cards, and I did not measure more than 40GB/s. Those cacards performed better with Obook 10 (54-85GB/s).

May be we have different revisions of tab.

[Andras Kenez]

I read Intel documentation.

Cherry trail SOC connect SD card with SDR104. But in Z8300 limited to DDR50 due to “PMIC power delivery limitation”

So no more than 50Mb/s.

Chuwi Hi8 pro, Cube iWork 10 and Onda Obook 10 all have Z8300 SOC.

But Onda Obook 10 did not follow Intel limitation and works with SDR104 speed. ( I tested it four 64 GB SD cards. Reading speed was 54-84 MB/s with Obook. But with Chuwi Hi 8pro and Cube iWork 10 also worked only DDR50 (almost same than USB 2.0 480Mbit/8= 60Mbyte) and no more than 40 megabyte/s ( I measured same speed through USB C port + USB 3.0 Sandisk USB drive with Chuwi Hi 8 pro, but same Sandisk USB drive works with Cube iWork 10’s micro USB 3.0 ports with 140Mbyte/s )

( And Obook 10 and  Cube iWork 10 did not follow Intel limitation with DDR3 memory size, and put 4GB into tabs. Great)

 

 

 

[Andras Kenez]

Thaks your reply.

I’m not sure…..

I have OndaObook 10 and SD vard reader works with USB 3.0 speed. and I have also had Cube iWork 10 with mico USB 3.0 port. (Both bilt with Z8300)

And Cube mico USB 3.0 port works with USB 3.0 speed. I do not think taht Cube has separete USB 3.0 controller on board…

I find answer.

T3 aka z8300 has one USB 3.0 OTG port!

Cube use it, Chuwi do not! Sorry, but Chuwi made poor job…

 

 

I share crystal disk bechmarks

1st

OBook 10 with Z8300 and Adata SD cacrd

2nd

Cube iwork 10 and my Sandisk  USB 3.0 pendrive

 

Attachments:

You must be logged in to view attached files.

[Andras Kenez]

With rooted Android you can setup free paragon NTFS and mount exFAT and NTFS SD cards to directory, but it is not perfect, Android . You can read contents, but Andrid complains unknown SD card….

[Andras Kenez]

I plugged linked cable to micoUSB 3.0 port of tablet. And I can conect My Sansung USB 3.0 external drive and sandisk USB 3.0  memory stick

[Andras Kenez]

Only internal SD card reader works with USB 2.0 speed

 

This one works well (micro USB 3.0 OTG)

http://www.aliexpress.com/item/Ugreen-Micro-USB-OTG-cable-adapter-USB-3-0-for-Samsung-Galaxy-Note-3-S5-i9600/32417048048.html

 

 

[Andras Kenez]

I’m looking for cheap “generic” tempered glass for iWork 10

“Original”  at least 10 USD  , I checked many “brand 10.1” tablets, but the screen size are different. I found te LG Gpad 10.1 V700 has almost same size (Lg a bit smaller)   Tempered glass for LG is about 5 USD (half price)

Do you know better one?

[Andras Kenez]

Chinase engineers always make mistake….

Tablet with USB 3.0 controller and connect SD reader to USB 2.00 port …… Very-very big mistake..

[Andras Kenez]

I do not understand nameing rules of Cube…

[Andras Kenez]

Baidu useless outside of China

I put better link 2 post before

 

[Andras Kenez]

If Dual OS  is it for i15TD ? You wrote T…

But thank you very much for Guide

 

[Author]

Posts