[valerima]

Can anyone share expereience if successfully upgraded to win 1607 Anniversary upgrade?

I don’t want to brick my tablet (w10 only)?

valerima

[valerima]

It was written on Chuwi forum you can install dual boot if SN on the back is higher than 451603xxxx

 

It is dualboot Hi12 after serial number 451603XXXXX
It is win10 Hi12 before serial number 451603XXXXX

valerima

[valerima]

…From some parallel post I have found that you started from W10 version tablet, therefore you have succeed now with dual.

It is a great. I had similar situation with Teclast x98 pro, v k9c3 and great tutorial was provided here.

I remember I have started from bios upgrade, then passed Android from Mirek Rom and Finally w10 suited to Teclastone.

How did you proceed?

valerima

[valerima]

Did you have Windows 10 version from the begining or dual one version?

If you have succeeded to get dual boot migrating from W10, then walkthrough would be useful to post it here.

valerima

[valerima]

Guys, thank you for prompt reaction. Indeed Mirek’s Rom is a great one. Interesting which solution Guru would propose.

valerima

[valerima]

Here< I would agree with Ferenc couple of posts above. I would be happy to remove Windows and stay with Android only here.

Windows started to be more and more boring and Android simply would be OK for main tasks. ..and resources would be saved , too.

It was some walkthrough probably somewhere, but it could be have prompt pointing to the process.

valerima

[valerima]

At first thanks for rome 4.

Problems I had with lags disappeared. Looks no prob with OTG support , too.

C9j6 version is superbv.

Now only problem I have wiuth teclast x 98 pro k9c3, no camera is working…

valerima

[valerima]

Which Plus teclast version you bought- maybe is sense to buy same?

valerima

[valerima]

i also experience lags with v.3 at pro, no OTG support and camera on my k9c3.

On teclast x98 c9j6 everything started just to be perfect when I used your version 7 for 4.4 android.

Maybe it has sense to use 4.4 for basis…

valerima

[valerima]

http://electronics.stackexchange.com/questions/152053/replace-3-wires-tablet-battery-with-2-wires-one

I do not know if it will work but maybe can try.

valerima

[valerima]

<dl class=”message-list-item high-light”><dd class=”clearfix”>

Friend, if this situation should occur, when connecting the battery, you don’t connect the white line.

</dd></dl><dl class=”message-list-item”><dt>vale rima</dt><dd class=”clearfix”>

2016-03-03 02:17:58

Dear …,
I have received your battery fast and it was OK, but just yesterday I have asked for replacement process at Technicks shop.
Battery replaced started to charge- I left it for 18 hours , it charged until 33% and then stopped. Now it discharges only – down to 29% percents.
Could you please advice what to do and how to make it fully charged… Or it could be defective and if then I could replace it to another, please?

</dd></dl>

valerima

[valerima]

Hi, I got same battery as Tecnick in same thread.

When replaced left for the whole night – it did not charge fully. Then in the evening I switched it on – found that it was charged on 33%. Afterwards it does not charge. Now it drains after every action chargiung % is decreasing – now 28%, but still I cannot charge it up anymore.

Any advise?

valerima

[valerima]

Dear Mirek,

Hope you well after all sicknesses…

As you recently wrote in one of forums you are working on new ROM for Teclast x 98 Pro…

I would appreciate very much for any information about battery saving is possible. However assume we cannot entirely cheat up inefficient chipset.

valerima

[valerima]

‘better camera” link would be appreciated…

valerima

[valerima]

it is safe, google play store is working perfect, fully supports dual boot and works in parallel to windows…I have used  Mirek’s Rom on another Teclast and have only best words for these ROMs.

valerima

[Author]

Posts