[S.]

Hi, any charitable soul could please upload somewhere a bios image for the Ezbook 3 Plus? My unit is dead… 🙁

[S.]

Not tested, but probably you can install a 2260 M.2 unit. For sure 2280 m.2 will not fit. Regarding the thermal pad, is a silicone one.

 

[S.]

Yeah, sould be enough.

[S.]

Hi, if you remove the copper lid on the right side, there is already a termal pad covering the core-m3.

 

Attachments:

You must be logged in to view attached files.

[S.]

Thanks Chris for posting. Could be possible to upload the bios binary file also?

S.

[S.]

Hi, after digging around with my bricker EzBook 3 Plus, trying removing battery, charging all day, etc. it seems that my last alternative to bring to life this big paperweight is to try to flash the bios as described here. Problems seems to be where I can obtain the bios image file… any ideas?

[S.]

S. wrote:

Sx C wrote:

Try unplugging the battery for ~30mins and pressing the power button every now and then to fully drain the system.

Thanks, I’ll try that.

Still no luck, any other suggestions?

Thanks!

[S.]

Sx C wrote:

Try unplugging the battery for ~30mins and pressing the power button every now and then to fully drain the system.

Thanks, I’ll try that.

sigma wrote:

wow i didnt even know that was possible! bricked as in you dont even get to a bios logo screen? the obvious would be if you set the boot device to a added m2 drive, then to remove it and see if the bios reverts. very interesting though – i would have guessed you needed to change one of the advanced settings to brick it!

Yes, I can’t get any bios screen, even the blue leds doesn’t light up after pressing power button for more than 15 secs.

Other issues I have found are that the space bar sometimes doesn’t work, and the sticker in the battery says ‘4800mAh’, although Windows reports more than 6hrs battery life.

[S.]

Hi!, Jumper EzBook 3 Plus owner here, now having a nice brick after changing boot order in BIOS. Same crap as the PRO model with the BIOS…

[Author]

Posts