JL

JL

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 24 total)
  • Author
    Posts
  • in reply to: EZBook 3 Pro – Life after death? #77804
    JL
    Participant
    • Posts: 29

    maybe try disconnecting the batter, holding the power button for 10-20 secs, plugging it back in,

    in reply to: EZBook 3 Pro – Life after death? #77405
    JL
    Participant
    • Posts: 29

    For me,when this occurred, letting the battery run dry was the solution to get it to boot back up with logo

    in reply to: Jumper ezbook pro 3 black screen after movie night #76568
    JL
    Participant
    • Posts: 29

    If you payed with Paypal they reimburse up to $45 for each returns postage.

    in reply to: Jumper ezbook pro 3 black screen after movie night #76451
    JL
    Participant
    • Posts: 29

    I had similar problem, and basically  CPU goes into sleep mode.  Sometimes doing what you do wakes it up, but most times it doesn’t.  The only way I could get it to work again, is to leave it on and drain the battery till it powers off on its own, then plug the power back in and turn on.  Unfortunately, due to the low power consumption this could take days.

    However if you manage to wake the CPU up again, and boot up, and the screen goes black again this is usually a hardware problem with the screen somewhere.

    in reply to: EZBook battery replacement #76373
    JL
    Participant
    • Posts: 29

    I just went via here http://www.jumper.com.cn/en/contact.php

    in reply to: EZBook battery replacement #76371
    JL
    Participant
    • Posts: 29

    I am also interested in knowing as I have a Yepo which has a smaller battery and interested and replacing it with a Jumper one.  Emailed Jumper directly but no response.  I wonder why its such a closely guarded secret.

    in reply to: My Ezbook 3 Pro's display its not working #76156
    JL
    Participant
    • Posts: 29

    wow another one…this happened to me also, well a different type of display failure.  Ended up returning to GB and getting a full refund.

    This is a deal breaker for me from buying another Jumper.

    in reply to: I hate this Laptop.. sorry it's just not working #75938
    JL
    Participant
    • Posts: 29

    Did you try the Synaptic drivers?

     

    in reply to: No CPU BIOS power settings ezbook 3 pro V4 #75909
    JL
    Participant
    • Posts: 29

    GB or Jumper definitely watch the videos and see what people are doing lol

    in reply to: Ideas what causes this type of crash? #74837
    JL
    Participant
    • Posts: 29

    i hope there is something in BIOS i Can do….just want it to be stable

    in reply to: Ideas what causes this type of crash? #74836
    JL
    Participant
    • Posts: 29

    Sounds very plausible reason

    in reply to: Ideas what causes this type of crash? #74770
    JL
    Participant
    • Posts: 29

    Are the stripes also recognizable in the bios? If so, it is probably because of the squeezed cable that goes to the screen. sorry for my Bad English

    no doesn’t when in BIOS

    in reply to: Jumper ezbook 3 pro startup problem #74764
    JL
    Participant
    • Posts: 29

    should it be Windows Boot Manager?

    in reply to: Ezbook 3 Pro V4 No display #74633
    JL
    Participant
    • Posts: 29

    I only got 60USD back….lesson learnt for me from buying from China…

    in reply to: Ezbook 3 Pro V4 No display #74581
    JL
    Participant
    • Posts: 29

    One Month old v4 Has Died

    I have the same issue. I have a youtube video of it. Yes I agree possibly damage to the cable from opening the laptop too many times,  which is just bad quality and design.

    GB warranty support is useless so looks like I am left with a dead laptop.

Viewing 15 posts - 1 through 15 (of 24 total)

Lost Password

Skip to toolbar