[Pascal Zinken]

Chupa wrote:

who told you that myth? check the official intel specs. it is 6 watt not 10 not 15 some people might get lucky and have a processor what would be normally higher rated but is still low rated because it did not pass all specs. I have one of these in my 3s, that is with the right monster cooling it works sustained 15w and 18w battery drainage but that includes the screen at full brightness.

Myth? The whole thread ” increase  tpd limit ” is full with people who accomplish over 10 watt…. Don’t patronize me

[Pascal Zinken]

Chupa wrote:

pascal, you have a 6w tdp processor with a power burst for max 40 seconds. with 9,2 watt constant you are good. the bios from my 3s has a lot more settings than the normal open 3 pro i can for every of the 4 processors set 4 different thermal reaction points what I all raised 15 degrees i also can and have done much more on the cooling side

 

But it should go to 15 watts with the unlocked bios settings…..

[Pascal Zinken]

Guys…. Please help

[Pascal Zinken]

Hi guys.

I flashed my 12/05 bios successfully (lots of more options to see now) I disabled powerlimits. Got RW everything… Changed the dump settings but HW64info keeps displaying max 9.2 watts on cpu. I saved the settings in RW everything (just as a file, not as binary) and when i load that file the pc crashes.

So its not working for me. Did i miss domething in all the pages here or what goed wrong that the tdp doesnt go above 9.2 watts?

[Pascal Zinken]

Giovanni wrote:

Dude, please stop. If you don’t like it you can tell it, but don’t criticize or at least help improving what you think it’s bad

+1

[Pascal Zinken]

Tobias S wrote:

Pascal Zinken wrote:

Tobias S wrote:

Hey, I did what you did in your so called tutorial. I work in the It-Section for years now and I have a lot of knowledge in this sector. I must say, that it works for me, but the way how you describe the steps to do are so god damn bad, I can´t believe it. I have professional knowledge and sometimes I dont know what to do. For example: “B: You readback your BIOS using the command ‘AfuEfix64.efi backup.rom /O’” Many of the users don´t know what to do there. I made it in efi mode, but most other people will struggle. Anyways, nice way you discovered, but really but presentation, considering a small mistake could convert people´s devices to trash. Cheers

Go write your own how-to then before trashing other peoples hard work you idiot. Arschloch

# Haha. Nice english. Guess you learned it in the baumschule?

On IGNORE

[Pascal Zinken]

Tobias S wrote:

Hey, I did what you did in your so called tutorial. I work in the It-Section for years now and I have a lot of knowledge in this sector. I must say, that it works for me, but the way how you describe the steps to do are so god damn bad, I can´t believe it. I have professional knowledge and sometimes I dont know what to do. For example: “B: You readback your BIOS using the command ‘AfuEfix64.efi backup.rom /O’” Many of the users don´t know what to do there. I made it in efi mode, but most other people will struggle. Anyways, nice way you discovered, but really but presentation, considering a small mistake could convert people´s devices to trash. Cheers

 

Go write your own how-to then before trashing other peoples hard work you idiot. Arschloch

[Pascal Zinken]

Giuseppe wrote:

<pre id=”tw-target-text” class=”tw-data-text tw-ta tw-text-small” dir=”ltr” data-placeholder=”Traduzione” data-fulltext=””><span lang=”en”>I’m sorry … I did the flash bios 12/05/2017 and I unlocked the menus. Is it normal that the MAIN menu with bios information is missing?</span>

Yes this is normal. I flashed same bios. So all is correct

[Pascal Zinken]

Giuseppe wrote:

Ho fatto il flash bios 12/05/2017 e ho sbloccato i menu. E ‘normale che manca il menu MAIN con le informazioni del bios? @giovanni

Englisch please

[Pascal Zinken]

Ivan wrote:

Hi Guys i have this bios, can I use this version already unlocked? https://photos.google.com/photo/AF1QipOfKi-C_pJcfz88dXce7jMbAeSKxX9vFGO_uk1U?hl=it Date 12/05/2017 19:25:21 Ver 3BANS010 Jumper10x.P8.WP3132.NHNAUHL01 My bios version is 2.18.1263 thanks

Yes u can. I have same bios and now unlocked… Its great!

[Pascal Zinken]

FatEnzo wrote:

It’s over 500/500! Very fast, very reactive. 200 euro (Ezbook Jumper 3)+ 80 euro (Samsung 860 EVO SSD): perfect machine for me.

Do you use the evo with adapter on usb or do you have the evo m.2 inside?

[Pascal Zinken]

KoLSMS wrote:

Giovanni wrote:

KoLSMS wrote:

Hello, maybe anyone can help me out there! i have flashed the new bios, i followed step by step the tutorial… All was fine! Now my Jumper isnt anymore booting, i have only the blue power LED on and the display is black, nothing works any longer… is it possible to reactivate my jumper or is it bricked?

Try disconnecting the battery

How Long must i do that? Can you say a time? That would be great!

Do it for 10 minutes and press power button to be shure all juice is out of the system

[Pascal Zinken]

Tokat wrote:

Chupa where can i buy The m2 USB 3.0 Adapter can you give a Link

 

Aliexpress. Look for USB 3.0 to M.2

[Pascal Zinken]

Some of you got lucky i think. I tried for days to get the laptop to boot from kingspec 128 gb ssd sequentially. Sometimes it boots a few time in a row as it should…. And then all of a sudden the bios doesn’t recognize the ssd anymore and boots into efi shell….. This happens completely random. I tried cloning the emmc with 2 different tools. I deleted the boot partition on emmc…. I fully wiped the emmc … I made bootable usb with rufus and did fresh install…. I manually formatted partitions before installing windows and at last i flashed the unlocked bios.

NOTHING WORKED. Now i have a clean windows on emmc and ssd for backup….. Snif snif

[Pascal Zinken]

labik wrote:

Does anyone tried to install Win7? Drivers available?

In my unlocked bios there is an option to set os to windows or win7 maybe this helps?

[Author]

Posts