@rdedic
Active 2 years, 12 months agoForum Replies Created
-
AuthorPosts
-
A very unusual mistake, most likely a bug. (you provided little information). What happens on first launch, does anything appear before this photo?
All SATA ports must be turned on.
boot option # 2 turn off and then install the OS
Your bios is unlocked. You need to go to the boot menu and turn off the 57.6 GB eMMs and set the new 119.2 GB SSD as the default and install the OS on it.
My sincere recommendation is not to touch anything. Not the same configuration with Jumper ezbook 3 pro, not the same bios, not the same processor, etc …
Respected you are in the wrong place (page) here is described as unlocking BIO on EZbook 3 Pro laptop and not on asus G731g.
Look for support on the asus website for your asus G731gu laptop model.Hello!
I saw you post with a question. I changed two SSD, the first was a kingdion, and it wasn’t the best, it often bugged and braked, so now I installed a new 42mm 256gb ROGOB MSATA / M.2 SSD that I bought through Amazon and I’m very pleased and I got almost 50% higher speed.<span id=”result_box” class=”” lang=”en”>Hello! <span class=””>I had a completely identical problem, after two months the battery went off, I bought a new battery, and after two days I did not want to use the computer again.</span> <span class=””>It’s Chinese rubbish that you do not have to throw money.</span> <span class=””>my eZbook 3 Pro has been in operation for only 6 months.</span></span>
May 29, 2018 at 10:51 am in reply to: Jumper Ezbook 3 Pro-dead, power light and screen don't work,charging light work #143417<span class=”goog-text-highlight”>Tražim pomoć ako mi neko može pomoći. </span><span>Nakon što sam zamenio bateriju, moj ebook 3 pro nije želio puniti akumulator dobro, pokušao sam da resetujem bateriju tri puta, napunio sam ga do maksimuma, a zatim isprazni do nekih 5%, a potom i moj ezbook 3 pro nije želeo ni sa punjačem. </span><span>Nastavljam pritiskom na dugme za napajanje 15 sekundi, plavo svetlo samo treperi i postoji kraj. </span><span>Da li mi neko može pomoći na bilo koji način?</span>
I ask for help if anyone can help me. After replacing the battery, my ebook 3 pro did not want to charge the battery well, I tried to reset the battery by three times I filled it to the maximum, and then emptied up to some 5%, and after that my ezbook 3 pro did not want to Not even with a charger. I keep pressing the power button for 15 seconds, the blue light only flashes, and there is an end. Does anybody can help me in any way?
That program you have for cloning, probably something is wrong. uninstall and download this program in free version, and try it with it: https://www.macrium.com/reflectfree
I’m a bit doubtful about the size of the disc in the image, it’s 2048.00 GB, check the formatting.
If what you’ve done is quite OK, now with the help of the cloning program, access the cloning, and after the cloning has ended, follow my instructions from the previous post.
Thank you very much Chupa, this topic has been treated extensively and I think it is very relaxed. I’m sure I’ll try to do it, but I’m not sure about the quality of the Chinese batteries. Although I think the size itself is very important for the true battery capacity. If once you thank a lot for your effort.
-
AuthorPosts

