Henry Atcorner

Henry Atcorner

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 26 total)
  • Author
    Posts
  • #75378
    Henry Atcorner
    Participant
    • Posts: 26

    Hi,

    Do you know which W10 update you performed? was it 1703 or 1709? I went to 1703 without any problem.

     

    thx

     

    henry

    #75377
    Henry Atcorner
    Participant
    • Posts: 26

    USB network dongle works fine on the HI12 on the Windows side since drivers are available. No way to make it work on the android side since, … to my knowledge, no drivers are implemented , nor available.

    Just another point of clarification ther is no such thing as 5G wifi,  there is wifi n with two frequency ranges,

    2.4 Ghz   or 5 Ghz, I suspect this is what you ment?

    I have also tried a USB to ethernet adapter, same issue, works fine on the windows side doesn’t on Android.

     

    Henry

     

    #72215
    Henry Atcorner
    Participant
    • Posts: 26

    Ran in the same problem, with W7, fortunately I had an old XP, which solved the problem. But I read somewhere that drivers for W7 do exist.

     

    Henry

    #72214
    Henry Atcorner
    Participant
    • Posts: 26

    Hi,

    Here is a Dropbox link to the CH 341 I used 15 month ago no TRJAN, worked fine.

    Good luck

    Henry

    https://www.dropbox.com/sh/xst9l5h03bjg86p/AABw0nA4U4pmKv1QQSZ5iPq6a?dl=0

     

     

    #71671
    Henry Atcorner
    Participant
    • Posts: 26

    Follow up to my previous post.

    I have updated my Windows 10 to Creator version 1703 with no problem just using The Microsoft utility Mediacreation tool.exe.

    I also have tested the new Macrium Backup free version.

    It just work fine and I was able to make  a full image of the drive.

    The back up  works fine but the incremental backup is only available in the paid version.

    Since I had no need to restore my system I didn’t test it, just keep my fingers crossed

     

     

     

    #71656
    Henry Atcorner
    Participant
    • Posts: 26

    I have read a lot of bad comments on the HI pen.  Did anybody ever checked if the Microsoft stylus for surface pro 3 works on the Chuwi Hi12?

    They are supposed to have the same screen?

    Now to answer the windows 10 migration issue, I have successfully upgraded in a first step to version to version 1603 and then to creator simply using the microsoft update tools through  Media creation tools.

    #70472
    Henry Atcorner
    Participant
    • Posts: 26

    Hi,

    I am a long time opera user. (something like 10 years) first on NOKIA and  Windows and then on all my Android devices. I just say that I almost never had a problem with it. ( except for some banking applications which are picky and support only Microsoft, Google and Apple). I have used it on my Chuwi 12 since I got it both on the Android side as well as on the Windows.  I currently use it on 3 Windows devices 3 Android devices and even on two IOS one. everything get perfectly synched and try browser is quite fast with some option to save data transmission. Now it takes quite of a level of expertise to work out all the settings and get the most out of it.

    #62212
    Henry Atcorner
    Participant
    • Posts: 26

    I went into the same issue. I did change the BIOS setting with no effect. I finally got the things work with a micro HDMI cable and an external monitor

    #62211
    Henry Atcorner
    Participant
    • Posts: 26

    I have tried many backup software. The only one working is Macrium. A few month ago only the paid version was working. According to the spec of the new free version it should also work. I will try soon. I have just upgraded to Windows 19 1607. In 1607 as in previous release it is impossible to save a system image with the Microsoft feature.

    #60299
    Henry Atcorner
    Participant
    • Posts: 26

    thanks but now all sd cards and flash usb say size is ony 1.84gb but i have 32gb they work in windows no problem but in android only 1.84gb i try fat32 ntfc noo diffrence pleace help

    Had the same problem. I when I format an external SD card connected to the usb port of the chuwi.

    I then format it on my PC ( NTFS).

    When I tried to read it on the Chuwi USB port it was not recognized.

    When I connect it on the SS USB 3.0 port it worked fine.

    #59594
    Henry Atcorner
    Participant
    • Posts: 26

    Thats possibly a stupid question but to clarify the situation for me. First you do as nicolas-giraud sad on page 1 and after these steps you use use any possibility (like Rashr or the “official way”) to flash the TWRP Image on the tablet, which Konstantin Matvievsky on page 2 provides? Or do i have to replace one file on nicolas girauds tutorial with the new image? Thank you in advance.

    Hi william,

    I wonder if you did get an answer to your question? either through this forum or by PM?

    I have the same one and would like to know before trying .

    Thanks

    Henry

    #52607
    Henry Atcorner
    Participant
    • Posts: 26

    No problem, as a mater of fact this is how I was able to write an emergency recovery boot CD.

    #43053
    Henry Atcorner
    Participant
    • Posts: 26

    I have connected a  dongle (netgear Wna 1000) it works great on the Windows side. On Android I have not yet found à way to get it detected. Still searching, any clue would be welcome.

    <!–more–>

    #41834
    Henry Atcorner
    Participant
    • Posts: 26

    HI,

    Can you tell me if,  it works both on Windows and ANDROID?

     

    Thanks

     

     

    #39966
    Henry Atcorner
    Participant
    • Posts: 26

    Bill you did a great job, I am still waiting delivery for my stuff from Ali express and my tablet is still open. I will try in the coming days to add some informations to your tutorial aimed at people with no previous experience in disassembly, checking, and working on high tech circuit boards.

Viewing 15 posts - 1 through 15 (of 26 total)

Lost Password

Skip to toolbar