Phoenix

Phoenix

Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • Phoenix
    Participant
    • Posts: 12

    I am getting the unlimited watt tweak applayed. When i stresstest it with furmark it only has 700 mhz for a couple of seconds, and then it turn down to 350-400 mhz again… So not really a good tweak i think?

    Temps are a bit hi, sure. Around 75 degrees… Is that the problem or is it the termal throlle hitting again?

    Phoenix
    Participant
    • Posts: 12

    Anyone has the .exe for me for 15 TPD tweak? 10 watt is working great, but the 15 watt looks more like it.

     

    got it allready through RW everything

    in reply to: How I cloned the 64Gb eMMC to a 256Gb M.2 SSD #63981
    Phoenix
    Participant
    • Posts: 12

    Did anyone tried a 60 mm at least? Or is it just not possible? Maybe when the iron bar is removed it fits?

    in reply to: Screen brightness shortcut keys #62901
    Phoenix
    Participant
    • Posts: 12

    Hey All, I’m loving my Cube Mix Plus and keyboard. I’m using the following AutoHotkeys script: https://techtablets.com/forum/topic/disable-touchpad-gestures/#post-61621, which has perfectly solved the annoying ‘swipe down = minimise all’ touchpad gesture issue. I was wondering if it would be possible to use a similar AutoHotkeys script (for anyone out there with scripting skills), to assign a keyboard shortcut to screen brightness (i.e. Fn+up & Fn+down) as it’s annoyingly missing from the stock keyboard. If anyone can help here, it will be greatly appreciated – many thanks.

    I have the same wish for the shortcuts for brightness control on the keyboard because the CHUWI lapbook 14.1 doesnt have them 🙁 Somebody?

    in reply to: Weird power characteristics of the n3450? #62836
    Phoenix
    Participant
    • Posts: 12

    Seems the same here… lowest i have seen 1.899 @ GT Cores…

    Should it be lower when idle?

    in reply to: 14.1 Speaker issue #62751
    Phoenix
    Participant
    • Posts: 12

    Maybe a bad connection. Great it works again!!

    in reply to: Lapbook 14.1 won't boot #62750
    Phoenix
    Participant
    • Posts: 12

    Probably you heated your cpu. Chuwi has done a bad job for the terminals.. see the review video of chris. I am still waiting for my copper plate to put on my cpu.

    in reply to: SDCard disconnect / connect Fix (Lapbook 14.1) #62623
    Phoenix
    Participant
    • Posts: 12

    Works like a charm! Thanks for the fix!

    Samsung EVO 128 GB works!

    Can you tell me you have noticed much speed improvement with the m.2 ssd?

    in reply to: LapBook 14.1 battery capacity? #62532
    Phoenix
    Participant
    • Posts: 12

    It’s not 7.4 volt, but 3.6 volt. That’s what i have heard in another review on the internet.

    Battery life isnt that bad, but not super good also…

    in reply to: LapBook 14.1 keyboard problems? #62531
    Phoenix
    Participant
    • Posts: 12

    I got a problem with my space-bar. I have too press it very hard to get a key-stroke. When i press gently it doenst register a key… Its kinda annoying..

    I dont have issues with lag when i typ.

    in reply to: my chuwi hi8 isue #12285
    Phoenix
    Participant
    • Posts: 12

    It only charge when i put my screenbrightness to 25% or so.. It’s a known ‘issue’. Turning your tablet off gives you a faster chargerate.

    I get around 4-5 hours on screen time with mine in w10…

Viewing 11 posts - 1 through 11 (of 11 total)

Lost Password

Skip to toolbar