Would it be possible for someone to send me the HingeAngle Service download please? I have tried to access the download page on the BMax page however it will not accept my pin on the bottom of my Y13? Thanks

@georgo85 I read that with some devices, such as yours, there might be a power draw limit in the EC (Embedded Controller) on the motherboard. Not much you can do about it. With my Teclast F15, I got best results by unlocking the power limit to 12W max. If I go 15W, there is thermal throttling, because I haven’t done any thermal modding yet. You…[Read more]

You should use the third party IPTV app on your phone for watching latest movies, TV shows, sports or anything…

I bought a DogFish 120GB SSD. First drive died after 1 days constant use. They replaced it and been using replacement nonstop for 9 to 10 hours a day.

I have gone a bit nuts on my pimping of my 6 PRO. Did the Shim mod (x2) and the SSD install, now im going to remove shims and attempt to fits the worlds smallest fan into it, :). I have some good…[Read more]

You have altered boot order in BIOS?

EFI is one of the options as first boot device.

Sooo after a lot of research (I really like max Mhz in my gpu :P) I found that actually the intel graphics plan in power options doesn’t affect the gpu clocks at all, as you can see in screenshots.

It seems that it is stuck at balanced at all times at 450 Mhz max not even a little spike at 700Mhz. I tried change it with Control Panel for Intel…[Read more]

Yes I restored the WIN10 Image successfully.

I use the Xiaomi 6A device for gaming. Normally, I’m playing Resident Evil game on my device smoothly. So, I recommend it…

Have you checked if the ssd comes up in the bios under “Chipset”->”South Cluster Configuration”->”Sata Drives”

And check if you:

-have Chipset SATA enabled

-have Port 0 enabled

-have Sata Device Type on “Solid State Drive”

-have something showing up after “Sata Port 0” like your ssd’s name

Greetings

Benjamin

See https://techtablets.com/forum/topic/drivers-for-ezpad-6-pro/page/4/#post-149718

Check which touchscreen model you have (a / b). What kind of problem do you have with your touchscreen?

If it generates touches on seemingly random spots and does not repond corectely then that issue can be fixed with the right driver.

Greetings

Benjamin

Enter bios with ESC

3x right for “Chipset”

3x down for “Uncore Config”

4x down for “Integrated Graphics Device” (I guess that’s the one you changed)

Enter

1x up for enable

Enter

Esc (Save and Exit, defaults to yes)

Enter

If this is not working please let me know…

(See images for orientation)

Greetings

Benjamin

Hi Murice,

according to https://youtu.be/WUVNKHqBOUU?t=133

there the storage is soldered directly to the mainboard, so you will be unable to expand it.

So options which do not involve soldering would be using an usb stick or an sd card.

They will appear as an extra storage, just like they would show up on any other pc.

Greetings

Benjamin

I had issues running the complete unlock via batch file or on boot. My way around it was to open RWeverything and then insert the commands and hit enter. Get the confirmation it worked and then I got 700Mhz and 2.3Ghz overall 4 cores.  Couldn’t quite get what Henk had for pulling 15W.

works fine

thank you

@Barry Thomson What F15 model do you have? The K3D5 or the K3D8? You can see which one on the base of the laptop or in the BIOS (press Esc at boot).

Hi,

Just received my BMAX Y13 this morning.

For the backlit use F2  (or Fn + F2) to adjust the 3 levels of intensity, high, medium or off. For me the backlighting isn’t really uniform, but hey that’s better than nothing I guess.

Very interested in the screen protector situation. Can’t seem to find any for this specific device, any update ?

I…[Read more]

Hi Chris

I haven’t seen the max gpu going over 450 even for a second and also according to throttlestop the limit is pl1 and some times edp current. Maybe if I tweek a bit the DPTF settings in bios I.🤞🤞

PS. Thermals are OK compared to knote 8 with the m3 core!!

So you restored the Windows 10 Image?

@georgo85 You should get 700Mhz max, but if you don’t it might be your thermals restricting you.

Hi guys,  The Fn and Esc keys would no longer work after the last windows update for some reason?  I used the system restore to take back to a previous date and it is now working. I don’t have a clue as to what could have happened?