Hi

Please help me, why my aptio setup utility boot option priorities only have 1 option. I cannot boot using thumb drive

You could give a try using this link:

http://www.teclast.com/tools/nb/nb.php?t=p

Insert in the box the alfanumeric string for F7, you can find it on the sticker over the bottom side of your laptop.

Expecting an answer using Italian doesn’t seems to me a good idea when posting on an international forum.

[Saluti dall’Italia]

You need a charger that uses QC 3.0 and usb-c to usb-c wire. Same for PB. Search imuto hub QC 3.0 on Amazon. I got one for around 18 quid.

1. Hi dude, I was trying to figure out how get my bmax y13 to charge using usb-c then came across your comment. I know it’s a couple months late but I had the same problem. I resolved this issue by increasing the minimum process state whilst on battery power to 55%.

Thank you dude!

Worked for me, really nice job!

Marty

You are welcome. Here you’ll find everything you need to do it: http://prometheus.freize.net/index.html

Thank you, that’s what I thought I have to do as I am not able to get the firmware.

I recommend you to install Padavan firmware. Instructions to do this are here: https://www.youtube.com/watch?v=hnvwm_aLSAE

You’ll get a completely new and performing router.

There are some pens that use the same outside components as the T6 and come with replacement nibs (soft and hard):

B07T46T8CY

B07WZNNTNW

They also used to offer standalone replacement nibs but they are no longer available:

B07CNNZ11K

Yep, misers pay twice I suppose… although I only bought because I couldn’t find anything similar from a reputable brand. I needed USB-C PD charging, FHD touchscreen, backlit keyboard, fan-less design. Don’t care about horsepower. Shame big brands are not interested in this niche.

Yes it seems it is not OS related. It is a technical issue with hardware or BIOS .. I’m very upset.

I’ve registered only to post my frustration with BMAX Y13. It is a good looking but basically dysfunctional machine that keeps crashing sporadically. For more details, see my review on Amazon where I’m a “verified” buyer.

@Marcus: I’ve tried the Windows 10 image/drivers from BMAX’s site as well as a clean install from the most recent Microsoft…[Read more]

hey folks !

I am looking at the surface go 2 … I like it but it’s very expensive in France with its core m3 and only 128gb of ssd. there are smaller chinese 11″ tablets on banggood but it looks like they are all 16/9 and I don’t like this screen ratio …

did you folks find some more “squareish” “small” chinese tablet that could compete with surf…[Read more]

this is it:

I was only able to acquire a 4500mah battery from the seller.    Tried another seller and told me the same.   The battery I received is less wide than the original (about 10mm less) so I assume they can at least make a slightly larger 5000 to 5500 mah version.   Anyone know of any source to get more than 4500mah?

I also find out about this, hoping to find the best answer!

This post is kinda old, but I hope this helps whoever that still is looking at this tablet with hackintosh.

Since there wasn’t much support for this tablet, I just went ahead and enabled this hardware with Mac OS.

Though the config I’m using is OpenCore 0.5.8 (latest) + Mac OS Catalina (latest)

You can see and get the work from here: https://git…[Read more]

Ah yes, thank you.. doesn’t take a screenshot directly but gives me a shortcut to snip.. thanks👍

Same Problem but 13.3 skylake.

Has anyone a working link or the file?

Thanks in advcance