I had the same problem

so i got the bmax y13 n4120 and my model PN says its H2M6, so i went to the website and it shows 2 drivers, one for the Touch pen 2.0 and another for a firmware 2.0 but there’s no download button on both

AFAIK the N4100 version doesn’t, see Chris’review, but according to the specs the N4120 refresh does (unconfirmed though).

It’s just what I try to do… let it discharge and poweron again

But there is 4 days that when I try to poweron it is still charged 🙂

Anyway I don’t think I was hacked.

Thanks for the help.

Denis

@denisj You’ve been hacked by chinese hackers! They watch you over the internet through your tablet’s camera!

In all seriousness though, you should let your tablet discharge completely, then charge it again and see if it works.

Good luck!

Nobody can help me please ?

he unbrick hi 13? procedure from hi 10 and hi 12 will be work?

this method work on hi 13?

Will be work on chuwi hi 13?

Thanks for sharing man!Really appreciate it!

Unfortunately it didn’t work, suborn igpu all that power end still 450 Mhz 😛

HI, I ma having the same issue on a F6 pro, I ahev tried 3 different cards and nothing happens either.

@georgo85 You could try to use http://forum.notebookreview.com/threads/the-throttlestop-guide.531329/page-1089#post-10984318 see if that makes a difference, just set IGPU=15 in ThrottleStop.INI

For my device it did, because it increased my average framerate by about 10-15% (from 30-35fps to 40-45fps).

p.s. last time I powered off using normal shut down under windows

realy nice – good idea *thumbs up*

I  found a screenshot from an ezpad 5se, which seems to have a bios with “Load Optimal Defaults” instead of “Restore Default”. I would guess Jumper tried to minimize the effort and reused the bios in different models, so the instructions might work for yours.

Hello.

Would you by any chace know where can I download the drivers? The link is not working

Hi to all,

seems that first page links to driver are removed… I downloaded they in the past, and they saved my pc… hope that official jumper driver will works on my next pc format. I got a ezpad 6s pro. To be sure, I made a double driver bakup of my actual working drivers.

Some tips i found: for the touch driver, it did not works. but…[Read more]