G

G

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 31 total)
1 2 3
  • Author
    Posts
  • June 17, 2018 at 8:47 pm in reply to: Jumper Ezbook X4 #143967
    G
    Participant
    • Posts: 31

    I’ve been relatively happy with my v4 EZBook 3 Pro, but then again that does seem to be the best version (when running Windows from an SSD).

    I don’t think I’ll risk it again in future though, I’ll just wait for Acer to put something similar like the Swift 1 onto the market.

    April 5, 2018 at 9:12 pm in reply to: Jumper Ezbook 3 Pro-dead, power light and screen don't work,charging light work #141591
    G
    Participant
    • Posts: 31

    <p style=”text-align: left;”>Sounds like the motherboard has died :(</p>

    April 3, 2018 at 11:51 pm in reply to: Linx 14 Ultra Slim £199 bargain (Teclast F7 clone) #141522
    G
    Participant
    • Posts: 31

    How are you finding it? I’ve read that the touchpad is a bit naff and the screen is a TN panel compared with the IPS screen on the Teclast?

    Amazing price either way given that it’s available in the UK.

    March 28, 2018 at 8:38 pm in reply to: EMMc to SSD simple, fast and a 500/500 result #141244
    G
    Participant
    • Posts: 31

    Easy for you and me, but not so easy for owners of new Jumpers whose bios does not support booting from SSD 😉

    March 9, 2018 at 11:35 pm in reply to: Issue with Kingdian SSD and Ezbook 3 PRO #140471
    G
    Participant
    • Posts: 31

    I’m using a Kingspec SSD from AliExpress with no probs.

    March 7, 2018 at 9:36 pm in reply to: USB 3 drivers? #140365
    G
    Participant
    • Posts: 31

    Mine is running at usb 3.0 speeds out of the box, what OS are you using?

    February 24, 2018 at 12:13 am in reply to: Boot stuck at Windows or Jumper Logo Screen #81129
    G
    Participant
    • Posts: 31

    I had something similar with an Onda, except that would blue screen on boot 50% of the time. Turned out the emmc was faulty, so I installed an SSD, put Windows on it and disabled the emmc in the bios. Problems went away.

    January 24, 2018 at 7:49 pm in reply to: Xiaomi Air 13 (2017) #77614
    G
    Participant
    • Posts: 31

    To avoid the tingling sensation you would need a charger with three pin clover connector for the mains lead. Had the same issue with a Lenovo. Essentially they are designed for 110v supplies where leakage isn’t as noticeable. I think.

    January 23, 2018 at 11:34 pm in reply to: Ezbook Pro 3 V4 – very slow and lagging when browsing #77571
    G
    Participant
    • Posts: 31

    Do you have any weird power settings which may be throttling the CPU? Try downloading the Passmark Performance Test application (30 day trial) and see what results you get.

    January 23, 2018 at 8:48 pm in reply to: Ezbook Pro 3 V4 – very slow and lagging when browsing #77567
    G
    Participant
    • Posts: 31

    The CPU is pretty weak still, and modern webpages need a decent CPU to load all the adverts. I use an ad blocker extension on Chrome which helps a lot 🙂

    January 15, 2018 at 9:12 pm in reply to: V4 or V5 or V6 or Bios or whatever that spoils a thread!!!!!!! #77033
    G
    Participant
    • Posts: 31

    The original v4 doesn’t have keyboard lag either. It’s the 4.5 which has the lag (and also cut down bios I think).

    January 15, 2018 at 9:09 pm in reply to: how to update bios ezb3pro v4 to v5 #77032
    G
    Participant
    • Posts: 31

    Not sure, but the original v4 doesn’t have the keyboard problem, do yours must be a v4.5 🙂

    January 11, 2018 at 11:09 pm in reply to: How do we protect against Meltdown and Spectre exploits? #76785
    G
    Participant
    • Posts: 31

    If you use Windows, then applying the latest patch will protect you from meltdown. Fixes will come for Spectre, but it’s far lower risk anyway.

    January 5, 2018 at 9:07 pm in reply to: Intel-SA-00086 serious vunerability #76533
    G
    Participant
    • Posts: 31

    I’ve not performed a before and after benchmark on my Jumper yet, but on my Onda 21 (of very similar spec), the performance difference is negligible according to Passmark.

    It seems the impact is on 4k file read speed mainly, which is more likely to impact on servers reading small pieces of data from databases etc.

    January 4, 2018 at 11:02 pm in reply to: Jumper ezbook pro 3 black screen after movie night #76456
    G
    Participant
    • Posts: 31

    Sad to see a few posts about this problem now 🙁

    For those whose devices have failed in this manner, which version do you have and when were they delivered? Just wondering if it’s a bad batch.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 31 total)
1 2 3

Lost Password

Skip to toolbar