Hi guys.

I have the same problem but little different.

I buy it in Bangood.

They say me to ship the notebook but I don’t know how.

Have you some idea?

Just got a T6S from Amazon Teclast store (Italy)… It works!!!!

The T6S and TL-T6 are identical, but the new one works very well with no setting to do in Windows. There is only a new writing 12.6″ just after the Teclast logo.

So is it official that you need PPS?

Anyone had any success without it?

Linux runs without any problem version xubuntu 18, kernel 5. But no camera. who knows drivers ?

Best

I’d use Double Driver to make a backup of all drivers currently installed on your own system & download the driver packs from the site just in case. Looks like some of the drivers were updated and you never know which works on any system….

Hi!

Quick question: my ezbook 3 pro bios (Ver 3BANS010 12/05/17) displays “EVALUATION COPY”, before and after the successful flashing of the unlocked rom.

Is it normal?

Pic attached

Thank you.
Is the doubledriver the only one that’s needed? I see in the downloads section that there are additional drivers listed (wifi and BT).

@henk-dev I think it just must be the differences in bios. I can happily hold 2.3Ghz all 4 cores and 700Mhz GPU now thank’s to you with furmark and CPU test the thermals max are always under 75 degrees which is great. I have a huge thermal pad on top of the copper heatsink. Before my GPU would lower to 450Mhz.

My bios completely different:…[Read more]

I’m on a clean install, with all the drivers from the BMAX’s website, and then updated them from the intel driver updater tool. As I’ve said I got rid of the DPFT in the bios and coresponding drivers.

The only thing I run, is said bat file at startup with these commands.

Wich limits mine to 15 watts, but I also got this script if I quicky want…[Read more]

@henk-dev So a disabled power limit (unlimited) in the bios and are you on the factory image or your own? I’m on my own fresh install. I can’t see what is holding me back with power limits but my GPU can hold 700Mhz, but still haven’t see it hit your 19W or over 12W

HWinfo reports no power limit.

I have my copper heatsink mod and huge thermal…[Read more]

The only thing I did in the bios settings is disabling the Intel DPTF, and setting the bios to unlimited. I didnt touch any C-states or whatever.

Add a pause at the end of your batch file, and try to see what the returns are when you run your batchfile as admin.

<h4>Hello,</h4>
<h4></h4>
<h4>I would like to say that i have the same problem with my BMAX Y13.</h4>
<h4>The touchpad is not working correctly. It goes jumping around the screen when i use it. I think that is a hardware problem, but i am not sure. I have checked all the drivers and have updated Windows 10 but the problem still…[Read more]

@henk-dev Hi, What are your bios settings? Power limit disabled C-states? And what do you have set under thermals?

Thanks, still struggling to get your results or over 10W

Yup, standard Win10 USB would be the easy way. Make sure you have all your drivers backed (doubledriver) up just in case, or get them from the dl section. Your license should reactivate automatically (if digital license).

Hello. I install the Ubuntu 18.04 in my Chuwi and works good. The câmera works with Gucview. In Cheese dont work. Works all but keeps the poor Intel drivers and in my case i maded the turbo boost and amplify the video card shared Memory to 512mb. Become faster and hot. Now i will made the heatsink mod.

No looking at HWinfo I’m still not going over 10W. Not sure what I’m doing wrong here so odd. I have power limits disabled in the bios, do you?

Do you also run the commands in that exact order?

Okay, I figured one thing out it doesn’t seem to run on boot the Task to run RW with the commands. Manually running it I have then everything unlocked on power limits no caps anywhere great! Now just to figure out the Task Scheduler why it fails to run or if it runs why the commands don’t work.

For me having the commands like this works.

Rw.exe…[Read more]

Not yet for some reason, I struggle to get it over about 10W with no thermal throttling but others I hit about 15W.

Ups, ur right, 2.3ghz is all core clock. 😉 No real overclocking for this puppy, as the multiplier is locked.

Did you manage to get it above 15 watts?

Great thanks for the tips!

I haven’t been able to get 2.4Ghz on all 4 cores just 2.3Ghz as per normal