Hi! Do you have complete driver package for Teclast F15 please?

I have the same problem. Can you help us to fix this please

Got it.

Hi Kyle,

Yeah, I think I’m going for the laptop mount but placing it upside down eventually. However for now, simply holding the laptop like a book in portrait mode in my lap seems to be a reasonably way of holding it for sketching purposes.

Of course it’s not a perfect solution if you need to use tools like rulers or if you want to draw in…[Read more]

Yes

It should be fine.

@katagiri, it’s on the first page of this post about half way down .

I couldn’t find it, anyway… I ordered de X4, I have a friend I know since he was a kid who works with computer maintenance, computer servers and heavy stuff, he also likes to do experiments as well, he convinced me to get a cheaper and lighter device that will be enough for my use.  I live in Brazil and this thing would fry here.

Thank you… 😊

Yeah the connector is same as you shown above… and the readings as I mentioned before  its showing 3.7volts with both RED to Black Wire on multimeter…. and 6.7k of resistance block and yellow wires….

As you said I’m ready to diagnose it… by removing the battery tape and measure the voltage of each battery….

And I…[Read more]

If you search my username you will find a small write-up with pics for opening up the X6 Pro . The mod does wonders for the thermals, no more throttling. I have a teenage son that pushes hard all the time and the thermals are steady solid .

**UPDATE****

It seems the laptop is completely dead! I disconnected the battery and plugged in the AC directly and nothing!! No LED status lights, screen did not wake-up, no boot up, NADA!!!!

I’m pissed and concerned at the same time, considering that I have an X6 pro as well and wondering if it will suffer the same fate after 18months!!

I…[Read more]

I said “vendor” not “manufacturer”. Your argument is invalid.

have you found a solution to fix this problem?

Please also see:

Ezpad 6 pro Battery problem

Connector
┌─────┐
│ v+ │
│ v+ │
│ nc │
│ nc │ <-Cable plugs in from this side
│ RES │
│ GND │
│ GND │
└─────┘
RES to GND is 10.01 kOhm at 24.0°C, so I guess thats an 10kOhm NTC.

V+ to GND is when about 70% charged 7.94V

Have you accedentaly measured resistance accross v+ and gnd? Because that voltage (3.7V) would be about w…[Read more]

If you boot it up with the power supply connected and disconnect it when windows is running does it go off aswell?

If yes then I would guess that something like the battery charging circuit on the mainboard is defective, so your best chance is the support from the place you bought it from.

If they don’t offer you warranty repair/replacement you…[Read more]

I don’t think that is normal that its hot while its charging turned off .Maybe you didn’t shut it down properly ?.And when you turned on i assume the fans cooled it down.At the top above the keyboard its normal that’s its warmer or hotter than other area because the exhaust is there (between the hinges ) and also the cpu and gpu heats up that area…[Read more]

Yes, but Surface is always better.