@denisj You’ve been hacked by chinese hackers! They watch you over the internet through your tablet’s camera!

In all seriousness though, you should let your tablet discharge completely, then charge it again and see if it works.

Good luck!

Nobody can help me please ?

he unbrick hi 13? procedure from hi 10 and hi 12 will be work?

this method work on hi 13?

Will be work on chuwi hi 13?

Thanks for sharing man!Really appreciate it!

Unfortunately it didn’t work, suborn igpu all that power end still 450 Mhz 😛

HI, I ma having the same issue on a F6 pro, I ahev tried 3 different cards and nothing happens either.

@georgo85 You could try to use http://forum.notebookreview.com/threads/the-throttlestop-guide.531329/page-1089#post-10984318 see if that makes a difference, just set IGPU=15 in ThrottleStop.INI

For my device it did, because it increased my average framerate by about 10-15% (from 30-35fps to 40-45fps).

p.s. last time I powered off using normal shut down under windows

realy nice – good idea *thumbs up*

I  found a screenshot from an ezpad 5se, which seems to have a bios with “Load Optimal Defaults” instead of “Restore Default”. I would guess Jumper tried to minimize the effort and reused the bios in different models, so the instructions might work for yours.

Hello.

Would you by any chace know where can I download the drivers? The link is not working

Hi to all,

seems that first page links to driver are removed… I downloaded they in the past, and they saved my pc… hope that official jumper driver will works on my next pc format. I got a ezpad 6s pro. To be sure, I made a double driver bakup of my actual working drivers.

Some tips i found: for the touch driver, it did not works. but…[Read more]

<p style=”text-align: left;”>Benjamin, thank you so much to do this, but unfortunately doesn’t worked for me. I have the Ezpad 6 and not the 6s. I think the exit menu is different. I remember there is a “Load Optimal Defaults” option, and don’t have the “Restore Default” option.</p>

Hi could you send me a copy. Download expires.

I premise that, by following the suggestions in the following guide:

I was, by now, working on the 120 Gbyte SSD hard drive on which I had cloned the original EMMC.

I was forced to delete all the partitions present in the SSD HD, also the recovery partition cloned from the eMMC.

I’m ignorant about…[Read more]

Ok this is fixed. As best as I can tell changing the system setting in BIOS from Windows to Linux bricked it. BIOS didn’t load so there was no display and ‘blind keying’ default setting did nothing – no surprise if BIOS wasn’t loading.

The solution was to unplug the main battery and leave it for a while – 30 minutes for me. After that the F6…[Read more]

Hi

MyEzbook 3 pro mount this version of BIOS:

American Megatrends Inc. Jumper10x.P8.WP3132.NHNAUHL03, 02/11/2018

taken directly by Windows System Information

Is there a modded version of this BIOS?

Sorry Luis, I meant to cite pepe, because his ssd was not working.